Mining fluid polymerisation protective agent is a room

temperature curing three-component modified epoxy

polymerisation nano-material composed of hard spherical

particles of ceramics, wear-resistant corundum particles and

super-hard wear-resistant powder. It is suitable for the precoating wear protection and repair of various types of pumps

(worm casing, guard plate, inlet and outlet) and pipelines for

mining.

1.surface cleaning: sandblasting or sanding, the location to be

repaired to deal with clean, until the metal to reveal the original

colour. Recommended use of efficient cleaning agent cleaning.

2.Matching glue: according to the weight ratio or volume ratio of

the product to match the glue, glue mixing requirements of

uniform colour.

3.glue: It is recommended to apply glue in 2-3 times, the first

layer should be thin, and should be pressed hard. The 2nd-3rd

layer to ensure a certain thickness, recommended 5-20mm.

Winter gluing can heat the glue and

the body.

4.curing: the curing of the adhesive is greatly affected by the temperature. Initial curing time ≤ 60min, full solid ≤ 12 hours (measured at room temperature 25 ℃) can be light load on-line

operation after initial curing, full solid can be full load operation; spring, summer and autumn 12 hours full solid, winter temperatures below 8 ℃ when the need for 18 hours to reach

100% strength. Heating can increase the curing speed, and help to improve the strength of the adhesive. Please choose the heating method below 100 degrees, such as tungsten iodine

lamp, hot air blowing, through the method of spring, summer and

autumn within 30 minutes of the initial curing, about 3 hours of full solidification, winter 40-60 minutes of initial curing, about 6 hours to reach 100% strength.

Adopting polymerised ceramic polymer wear-resistant

technology, with hard spherical particles of ceramics,

silicon carbide particles and powders, high-performance

titanium alloy powder, high hardness metal carbide as

the backbone of wear-resistant composite materials for a variety

of different working conditions, with the

process solution to solve the wear and tear of machinery and

equipment. Apply to equipment repair or make

pre-protection coating, such as fan shell, pump shell, all kinds of

media pipeline pipe network (curing for gas,

steam, water, oil, acid and alkali liquids, gas, oxygen and other

all media applicable).

1. Adapt to a variety of powder, small particles, large particles of

abrasion conditions coating and the basic

combination of high strength, good wear resistance to extend the

maintenance cycle of the equipment, reduce

the consumption of spare parts, process operation is simple,

reduce downtime to reduce labour costs, improve

the efficiency of maintenance.

Inner Mongolia Sending EP&ES Co., Ltd.